Freedom 5000

The Freedom Series 5000 are full-featured 4-20mA, loop powered transmitters designed to reliably detect oxygen and any of a number of toxic gases. Its universal electronics and flexible, user-friendly features drive down gas detection costs for almost any facility.

The Freedom Series 5000 advanced GasPlus Sensor Technology combines with The Freedom Series universal electronics to simplify use and minimise maintenance requirements of your gas detection system. Every Teledyne Gas & Flame Detection 'Smart' Sensor provides data such as gas type, range, and calibration data to the universal electronics for automatic transmitter configuration. A built-in lithium battery keeps the sensor 'hot', which eliminates the need for sensor warm-up time. On-board electronics enables users to easily zero and calibrate the sensor. An E-Connector eliminates pin alignments and makes sensor replacement quick and easy.

The unique electrical design of the The Freedom Series transmitter and sensor virtually eliminate false alarms due to RFI/EMI sources. The transmitter can be mounted directly to rigid conduit and is available with several optional adapters including wall/surface mount and a special 'L' shaped bracket to allow mounting on top of flat surfaces such as gas cabinets. Freedom series transmitters are also available with quick connect 1/4 turn sample draw and (flat or round) duct mount adapters. The sensor can be ordered integral to the transmitter or remote on three feet of cable, perfect for mounting the sensor near ground level while keeping the display at eye level. Operating Freedom Series transmitters is simple and intuitive. After start-up, the transmitter automatically configures to the sensor's parameters. The 'missing sensor indicator' alerts operators that the sensor is either missing or the sensor transmitter connection has been broken. Calibration is non-intrusive, performed by touching a magnet to the 'Z' (zero), 'S' (span), and up and down arrow markings on the enclosure. A programmable local inhibit feature and standard local display allows true one- person calibration.

Features

• Universal transmitter electronics for all gas models.
• Simple magnetic interface and local inhibit eliminates special tools or expensive IR remote controls.
• E-connector makes for quick easy installation.
• Smart sensor technology permits sensor removal for remote calibration.
• Rock SolidTM Sensor Technology offers superior stability and selectivity.
• Built-in calibration factor notifies user of remaining sensor life.
• Design concept eliminates interference through electronic design versus shielding.
• Internal battery keeps the sensor “warm” for immediate start up.
• All plastic construction with conformal coated internal circuitry.

Benefits

• Redundancy of Safety Features – gives confidence in the life-saving equipment and allows workers to focus on the critical job at hand.
• Ease of Use – provides users a simple-to-use gas detector that requires minimal training, increases operational efficiencies and reduces training costs.
• Low Cost of Ownership – lowers costs after initial sale through its rugged design, assembly and warranty policy enabling you to direct valuable funding to training and other equipment cost.